Archive

Category Archives for "DIY Projects"

Band Saw Vs. Scroll Saw: What Should You Buy?

A band saw or a scroll saw is one of the most popular stationary power tools. They all help you to cut curves smoothly and accurately. Still, they have different features, pros, and cons. In case you are looking for such a tool to cut curves, which one should you buy? A band saw vs scroll saw. It is essential that you know about the main differences between these tools as well as your specific needs and preferences.

Check out our article below to see what separate a band saw from a scroll saw and their advantages and disadvantages.

The Main Difference Between A Scroll Saw And A Band Saw

The main similarity between two types of saws is that they can be used to cut curves. However, they are quite different, in their overall sizes, the sizes of the blades, the powers and the capacities.

  • In general, a band saw is a bigger type of saw in comparison with a scroll saw.
  • The blades of the band saw are longer than the blades of the scroll saw. The blades of the band saw are also thicker. Typically, they are 3/8 inches or more in width. On the other hand, the width of the scroll saws is about 0.25 inches. In addition, a typical scroll saw’s blade is about 5 to 6 inches in height while a typical band saw’s blade is  6 to 12 inches in height.
  • These types of saws are also different in the movement of the saw blades. The blades of the scroll saw move up and down to cut while the blades of the band saw rotate around the rubber wheels to cut.
  • In term of power, the scroll saw is not as powerful as the band saw. The band saw can make much more vigorous cuts. Hence, these cuts would be rougher than and not as smooth as the cuts made from the scroll saw.
  • Prices can vary a great deal among different models of band saws and scroll saws. However, an average band saw along with its accessories is more expensive than an average scroll saw and its accessories.
  • Since the power that a scroll saw consumes will be less than the level of a band saw, the scroll saw is more energy efficient.
  • A scroll saw is also known as a specialty saw while a band saw is known as a versatile saw.

Scroll Saw

Pros

  • A scroll saw can help you cut small curves- some can even help you cut the curves as small as the head of a pin. Not only that, a scroll saw can help to cut thin pieces of material, which are about 1.5 inches in thickness.
  • Delicate patterns including turns or twists are easier to make on a piece of wood using a scroll saw.
  • In addition, a scroll saw can produce smooth and thin edges without losing a lot of bits of materials. Think about making a set of puzzle, this ability of the scroll saw makes it easier for you to make a puzzle.
  • It is the best when it comes to having tight cuts so that you don’t have to sand the edges of the cut pieces.
  • Another advantage of a scroll saw that a band saw couldn’t do is that it can help you cut a shape right in the middle of a piece of plywood. A band saw will cut right through it. However, with a scroll saw, you can drill the holes first before threading the scroll saw along the shape you want to cut, making internal cuts possible. As a result, you can make an inner circle easily. There is no entry and exit cut- which a band saw couldn’t do.
  • Last but not least, thanks to the foot pedal, you can operate the saw without using your hands. Your hands are free to handle the material safely and securely.

Cons

  • Even the most powerful scroll saw has a narrow saw blade. As a result, it couldn’t make much neat straight long cuts like what a band saw can do.
  • It can only cut a piece of material which is less than 0.75 inches in thickness.
  • In addition, a typical scroll saw can cut much smaller and tighter circles than a band saw can.
  • It cut can pieces of wood more slowly than the band saw can cut.

Band Saw

Unlike the scroll saw, the band saw is more suitable for cutting a thick piece of plywood or so.

There are several types of band saws and each of which is made to do different things. These types of band saws include benchtop band saws, stationary band saw, and resaw band saws.

Pros

  • Benchtop band saw: This type of saw is the smallest and most portable type of band saw. You can consider buying this one if you want a band saw that you can easily bring it to your work site. If you don’t have much room in your working station, a benchtop band saw would be compact enough. It can help you cut big curves on many thick pieces of materials such as plywood or solid wood.
  • Stationary band saw: If you need to cut thicker and harder pieces of wood than a piece of plywood (such as the oak, pecan, and hickory). In addition, if your woodworking project has a lot of rip cuts instead of the tight curve cuts, this kind of band saw will provide the best cuts.
  • Resaw band saw: This is the biggest and most powerful type of band saws. It can make straight cuts as efficiently as curved cuts.

With a wide range of types of band saws and the sizes of the blades for you to choose from, this type of saw is universal and versatile. It helps you cut pieces of materials of different thickness.

Last but not least, you can modify the band saw to make it operate like a table saw by clamping a fence to the working station.

Cons

  • Overall, all types of band saws couldn’t cut cleaner and smoother cuts. Hence, they are not suitable for any project that requires the precision in the small details.
  • Since the blades of the band saw are fixed, it couldn’t cut on the inside of a piece of material.
  • With a large radius, a band saw’s blade couldn’t turn as sharp as the scroll saw. Hence, the details made with the band saw are not as sharp.

How To Decide On Which Tool To Buy?

After you know about the differences between a band saw and scroll saw, you need to think about your preferences as well as the nature of your projects in order to choose the best stationary power tool.

Think about your project: Do you often work with big projects like curved furniture, cabinets, or molding? Or do you often work with small projects like making puzzles or doing a craft project that need precision for small details?

If you often work with big projects and thick pieces of material, a band saw is the better option for you. On the other hand, if you need a tool for cutting small and thin pieces of material, a scroll saw is a suitable choice. If most of your woodworking project are crafting, you should consider buying a scroll saw instead of a band saw.

Since both tools are quite opposite in capacities, many professional woodworkers use both tools for different projects. However, if you don’t want to spend a lot of money on buying many tools that you are going to use just for a few times, think about what you need more.

For many DIY hobbyists, when they start working on their projects, they decide to buy a scroll saw first. First of all, a scroll saw can do an internal cut while the band saw couldn’t. Second of all, most of us tend to work with smaller projects first to gain more skills and experience before we move on. When they start gaining more skills, they move on to bigger projects. And they decide to purchase a band saw after all.

Conclusion

I hope that this small article helps to answer your question: “Should I buy a scroll saw or a band saw? Overall, they have different features and different capabilities. The scroll saw is better if you often work with small pieces of materials and the band saw is better if you work with much better pieces of equipment. If you work with both, you need to trade one off for the one that you will need more.

Sidewinder Vs Worm Drive – What Type Of Circular Saw You Should Choose

The circular saw is undoubtedly one of the most popular power tools that any home or commercial workshop has. When you start building your own workshop, the first tool that you need to think about is, of course, the circular saw. In order to choose one, there are a lot of things that you need to choose from including the type of the circular saw or the blade size, to name just a few.

I have seen many people being confused about worm drive vs. circular saw while in fact; the worm drive saw is just a type of circular saw.  Let’s learn more about the worm drive and the other type of handheld circular saw as well as the most important features you need to consider when choosing a circular saw.


The Difference between the Sidewinder and the Worm Drive Circular Saw

As I mentioned above, there are 2 main types of handheld circular saws which are the sidewinder and the worm drive type. They are mainly different in the mechanism and the design of the motor.

  • A sidewinder circular saw can have the motor on the right side or the left side of the blade.
  • On the other hand, a worm drive circular saw has a motor which is situated behind the blade. The first model of the worm drive circular saw was invented in 192 and the most popular brand of the worm drive is the Skil Model. The brand is so popular that many people mistake it as the Skil saw and consider it one of the types of saw that you can buy on the market.

With the information about the design of the motor in mind, we will discuss in more details about other differences between the sidewinder and the worm drive circular saw.

1. Weight and design:

With the motor which is placed behind the blade, the worm drive saw is typically heavier than the sidewinder saw. The sidewinder saw is generally lighter and generally more compact in size. However, such worm drive saw would be narrower in size when compared with other sidewinder saws.

2. The speed of the blade: 

Normally, the worm drive saw can spin at about 4000 to 4400 rpm. The sidewinder saw will spin at about 6000 to 6200 rpm, slightly faster than the worm drive saw. This is because the motor of the sidewinder circular saw is in line with the spinning blade. With the faster speed, you would have less torque for tougher cuts.

3. Right Hand Or Left Hand Option: 

The worm drive saw only has 1 single choice of design while the sidewinder circular saw has 2 options- with the motor on the left and the motor on the right. Hence, if you are a left-handed carpenter, you might find the sidewinder circular saw with the motor on either side of the blade much easier to use and control. It is also worth noting that for many carpenters, the motor which is located on either side of the blade of the circular saw will make it much harder to see the line that you want to cut. Hence, if your dominant hand is the right hand, you will want to buy a sidewinder circular saw with the motor situated on the left hand side of the blade. On the other hand, if your dominant hand is the left hand, it would be easier for you to use the sidewinder circular saw with the motor situated on the right hand of the blade.

4. Safety: 

There are many factors that contribute to the safety of a type of circular saw. First of all is the weight of the tool itself. A lighter and more compact tool would make it easier for you to control, hence, would make it safer for you to use. In this case, the sidewinder circular saw would be considered safer, especially when you need to work overhead. Second of all, you need to ensure that your hands are kept at the safe distance when you operate the tool. With this in mind, when you handle the sidewinder circular saw, you would be able to keep your hands far away from the motor and the blade, making it also safer for you to use this type of power saw.



Other Factors That You Need to Consider When Choosing a Circular Saw

1.The Bade Size:

The size of the blade of a circular saw refers to the diameter of the blade. If you are looking for a versatile circular saw that can cut through most of the materials, go for the blade with the size of 7 inches and more. Not to mention that with the average size of 7 to 7.25 inches, you would be able to find many types of blades as well.

2. The Types Of The Blade:

Besides the size of the blade, you also need to consider the design of the blade as well. One of the most common designs is the one with the carbide tipped teeth. That design makes the blade very versatile and functional of cutting many types of materials. On the other hand, if you know exactly what types of materials that you often work with, including wood, metal, or title, you can buy the one which is made specifically for cutting these types of materials. The number of the teeth is also one thing that you need to consider as well. Basically, the more teeth a blade of a circular saw has, the cleaner the cuts you would have. You can plan on buying a few blades as changing them for your own needs and requirements will not take you a lot of time.

3. The Power:

You would know how powerful a circular is by looking at the amperage specification of this tool. For the handheld circular saw, including the sidewinder and the worm drive type, the most common amperage is from 10 to 15. The more powerful the circular saw is, the better it is to work with different types of materials and the more efficient it is when you need to cut a lot of materials.

4. The Corded Or Cordless Option:

Last but not least, you should also consider if you want to buy a cordless circular saw or a corded one.  They have their own pros and cons for your consideration. For a cordless circular saw, you don’t have to worry about finding a power source to make the tool work. You can bring it around to anywhere you want to. However, a cordless circular saw is quite expensive. If you have a workshop and work mostly inside it, you don’t have to spend extra bucks of money for a cordless circular saw. Some corded circular saws come with very long cords as well for your convenience. However, they will never be as convenient and portable as the cordless circular saws. Another thing to consider is the power of the cordless or corded circular saw. Cordless circular saws might have limited power due to the limited batteries. Hence, you should use the cordless circular saws if you want to cut wood only.

5. Price:

If you have little experience in choosing any power tool in general, not to say the circular saw, maybe one of the most reliable factors you can use to choose a circular saw on the market is the price of the model that you want to buy. In general, the price of a sidewinder circular saw with a decent quality could range from around 100 dollars to 150 dollars. A sidewinder circular saw which is less than 100 dollars could be not so durable or powerful enough. On the other hand, the worm drive circular saw will be more expensive in general. You should expect to pay at least 200 dollars for a high quality worn drive circular saw.

6. Safety Features: 

Furthermore, you need to ensure that the circular saw that you are going to buy has a safety switch and the blade guard.

7. Other Things: 

Different types of circular saws on the market come with different weights and sizes. It is the best that you can experience each of the tools yourself. Check if the handles of these tools are comfortable in your hand. You also need to check if you are comfortable with the weight and the way the circular saw balance itself. A tool is suitable for you only when you feel comfortable handling it.


Conclusion

So as you can see, the sidewinder circular saw is lighter and capable of spinning faster than the sidewinder circular saw. In addition, it is also cheaper. Hence, if you are thinking about buying a circular saw for your workshop at home, you should consider a sidewinder circular saw first. Also, if most of your work requires working overhead, you can consider buying a sidewinder circular saw.

Here are just a few basic things that you need to know about the sidewinder and the worm drive circular saw. I hope that with all of the information above, you would be able to understand a bit more about the circular saw as well as the most important factors that you need to consider including the blade size and the power of the circular saw. With such information in mind and careful consideration, I am sure that you would be able to find the most suitable circular saw for all of your own needs and requirements.

Jigsaw Or Circular Saw – Which Is The Right Tool For You?

Undoubtedly, the jigsaw and the circular saw are among the most popular power tools that you can find in workshops and garages. They are both powerful tools which you can use to perform a lot of different tasks. If you are searching for the first tool to buy, many people would recommend the circular saw. Some would recommend the jigsaw. So what tool is the right tool for you, jigsaw vs circular saw?

Check our guide below for the features of the jigsaw and the circular saw. Also, learn about what they can do and the main differences between these tools in order to decide whether they are the right tool for you.

When Will You Need To Use The Jigsaw?

The jigsaw, which is also called the saber saw, is made with a motor and a reciprocating saw blade. The blade of the jigsaw is thin and narrow which moves up and down in order to cut through a piece of material. Overall, the jigsaw is a handheld type of saw.


Here is the list of what you can do with a jigsaw:

  • The jigsaw is a very versatile power tool. With this tool, you can do a lot of cuts- from straight cuts, to curves and circles. In comparison with the circular saw, the jigsaw is a better tool for you if you want to have curved cuts.
  • You can also perform inner cuts with the jigsaw, provided that there is a pre-drilled hole.
  • It can work on a wide variety of materials- from wood, metal, to foam and plastic. There are many choices of blades for you to choose on the market and different blades can be used to cut different types of materials precisely and efficiently.
  • It is small and portable, which allows you to carry the tool around without any difficulty. It also helps you with overhead work. And you can easily store the tool in your garage even if you have limited working station.
  • You can also mount this tool to a platform. This will help you to balance the materials throughout the cutting process in order to have smoother and more precise cuts.

What are the Main Drawbacks of the Jigsaw?

  • The jigsaw is not the right tool for you if you are looking for a tool for smooth and precise cuts.  If your project requires you to cut to the highest level of precision as possible, the jigsaw, which can only produce rough cuts, will not be able to deliver the job perfectly.
  • This tool is also not the suitable tool for finishing tasks.
  • Since it is a handheld tool, how much stable your cutting process is or how smooth your cuts are will depend largely on your skills, your experience, as well as your steady hands.
  • Last but not least, keep in mind that the jigsaw tends to bounce over. As a result, it is even more difficult for an amateur carpenter to move the blade along the line that you want to cut - as steadily and evenly as you might want.

When Will You Need To Use The Circular Saw?

There are several things that the jigsaw and the circular saw both have. Both of the saw are handheld and operate using power. However, while the jigsaw has a thin and narrow blade, the circular saw has a circular blade. As you can see, the designs of the circular saw and the jigsaw are totally different. Hence, it would be easy for you to tell these two tools apart just by looking at them. However, they share some similar characteristics, which might confuse you.

What are the benefits of using the circular saw?

  • Like the jigsaw, the circular saw is one of the most popular and versatile tools. It can perform a lot of cuts, especially straight cuts, and angled cuts quickly and efficiently. It can also be used o make rough rips and bevel cuts.
  • In addition, the circular saw can help you cut through a wide range of materials from wood, to tiles, metal, masonry, and pipes. Of course, it would depend on the blades that you have in hand.
  • You can use the circular saw for most of the DIY home projects such as making toolbox, masonry work, and roofing.
  • Many choices of blades of the circular saws that you can find on the market have more than 50 teeth. As a result, you would be able to have many smooth and clean cuts.
  • There are many choices of blades for you to choose from with a circular saw. For example, you can go with a big blade with fewer teeth if you want to have fast cuts. On the other hand, you can go with a blade with a lot of teeth in order to have smoother and cleaner cuts.
  • Last but not least, the circular saw is also a very compact and portable handheld saw. As a result, it is easy for you to carry the circular around as well as storing it in your small garage.

What are the main drawbacks of the circular saw?

  • The circular saw is the powerful tool only when you know which jigs you should use. For example, if you want to have the perfect 90-degree cut, you might need to use some extra tools for the task. It requires knowledge and experience.
  • It can lead to rough edges on the sides of the cut pieces of material.
  • It is not as good as the jigsaw in term of making curved cuts. The curved cuts made with the circular saw might not be as accurate and clean.

Which Is The Right Tool For You?

The choice of which tool- the circular saw or the jigsaw that you should buy as the first tool for your workshop depends on your personal needs and preferences. Both of the tools are the most popular and versatile tools that can help you deal with a lot of projects. If you can afford it, it is the best that you can buy these 2 tools that you will use a lot in the future. The reason is, while both of the tools are so versatile, there are some tasks and projects that the circular saw is a more suitable tool to use rather than the jigsaw and vice versa. For example, the jigsaw is a better tool for plunge cuts rather than the circular saw. In addition, cutting curves can be better done with the help of a jigsaw rather than the circular saw. On the other hand, in term of cutting straight cuts, no other tool is better than the circular saw.

So think about your projects and what cuts you would often have to make more. If your projects require a lot of straight cuts, you might consider buying the circular saw. On the other hand, the jigsaw would be the better choice for you if your projects require a lot of curved cuts and plunge cuts.

However, keep in mind that the circular saw or the jigsaw alone will not help you much with all of the tasks and projects. You need to have the right blades, the right jigs as well as a lot of experience in order to have the best cuts.

You might end up owing only 1 type of saw. However, if you know how to make use of other jigs and accessories, I am sure that you would still be able to make the most out of the tool that you have. As I have mentioned above, the circular saw is a better tool for you to make straight cuts rather than the jigsaw. However, if you have the jigsaw, you can still make use of the straightedge cutting guides. And you can still have curved cuts with the circular saw if you have the right jigs and knowledge for the needed tricks.


Final Verdict

No tool is better than the other tool. So the choice of which type of saw- the jigsaw or the circular saw to buy depends much on your personal preferences and requirements.

Still, no matter what tool that you are going to buy, you need to choose the one with a decent quality. It needs to be powerful enough for the projects that you want to do. And it needs to be durable and long-lasting so that your initial investment can last for a long time. There are many other things that you need to consider including the size of the blade, the size of the saw, the power of the saw, as well as the safety features of the tools.  As long as you spend enough time researching, I am sure that you would be able to find the most suitable tool for your projects in the future.

As you can see, both of the circular saw and the jigsaw are the most powerful and versatile tool. Still, they have their own strengths and weaknesses. The circular saw is better for some types of projects and the jigsaw is better for some others. They are not the same and definitely not interchangeable. I hope that with all of the information above, you would be able to choose the right tool for your specific needs and requirements. With the most suitable tools, I am sure that you would be able finish many woodworking projects and other projects in the future.

6 Best Wood Routers Review For Your Project 2020 – Buying Guides

Choosing the Best Wood Router and adding it to your project tools can be a daunting task. Our buying guide and review will let you choose the Best Wood Router for your next projects.

Make a variety of cuts, make duplicates of certain wood patterns, sharp edges, joints and decorative surfaces, among many other things.

Have you seen any woodwork and marveled at its construction? Well, I guess you have then there is no gainsaying that if you are a woodworker, you definitely know by now that not all woodwork is best done without a machine.

Many among these machines or devices are the best wood router. Now, getting the best wood router doesn’t just make your work easy but also gives you the seamless means to create an artistry work for your joinery.

How to Choose the Best Wood Router

We all know that the markets are filled with lots of wood routers, and hence, you are fuzzy about choosing the best among the plethora of wood routers at your disposal. Well, if you follow me along this journey, we will together solve this herculean task.

Router Bits

Let’s start like this, in case you don’t know, know now. It is the router that may be responsible for the production of all the power and speed of the device however the router bits are what will do the real work as they are the piece of that is in contact with the workpiece.

It is safe to say that without a bit a router will be as useless as the letter p in psalm meaning a futile apparatus hence it is yet imperative to ensure that you pick the correct ones for your specific projects or applications.

Amongst the commonly found bits are straight, chamfer, edge, dado, dovetail, nose and V-groove et al. Again,  with regards to router bits, the more you have the better, as it additionally implies the more you can utilize the apparatus but do ensure they are of first-rate and won’t break after a couple of operation.

Speed

Well, I assume speed should be very high on our scale of preference in choosing or when looking for the best wood router because every woodworker is desirous and is continually searching for a tool that carries out his job as fast as possible.

In any case, with regards to wood router getting something with variable speed is utmost crucial than going for high speed. Variable speed wood routers are progressively adaptable, and they give you total control over the job with the goal that you generally get effective outcomes.

Additionally, variable speed enables you to make alterations relying upon the bits you are utilizing. Littler bits require high speeds to cut neatly while the huge ones work best and securely at slower speeds.

Size

Irrespective of the fact that you may like to operate with the inexpensive fixed base router or the plunge base it is vital that you select the size you need. And the options are listed below:

1. Palm/Trim Routers

Just so you work well, or would rather work with a wood router which can be easily maneuver with a hand, then the palm size or trim router is definitely your choice They commonly come equipped with 1 or 1.5 HP engines, and regardless of their magnitude, it’s also yet fit for taking a shot at generally massive workpieces.

The trim wood router can likewise be very flexible, as it can be used for different applications, for example, edge shaping, cutting and little scale dovetailing errands.

2. Midsize Routers

The moderate size wood router comes equipped with an engine that is between 1-3/4 and 2-1/4 HP, and due to its versatility it is highly demanded. They will accompany either with a fixed or dive base, and they will require two hands for activity.

Other than the fact that Palm wood routers are highly handy; it can also be used for various woodworks applications for example, board cutting and enormous scale dovetailing.  It also works well for heavyweight millings.

3. Full-size/Large Routers

For a veteran in this field who seeks for a workhorse with regards to routers it’s important, you know that wood router of this size is the best decision to choose from amidst others. Furthermore, they are, for the most part, intended production.

It is certainly possible the full-size motor engine will have of up to 3 HP hence its massive size; they will in many cases be operated from a router table. Even with it bulkiness it is still handy for almost all task there is; however, imply that they are unreasonably lumbering for regular handheld use. It is not an ideal router for inexperienced hobbyists and beginners.

Benefits  of Using Wood Routers

1. Carving out Wood 

Wood router can be used to carve out a piece of wood to frame a solid connection. This connection can be additionally utilized in the entryways and window or cupboards.

2. Re-making Designs

It is also possible to use a wood router to cut, form pattern on a piece of wood. With this, you can without much of a stretch fix any damaged portion of any table or some other bit of wood.

3. Accuracy

This is one of the key highlights of the wood router that is compelling in joinery. It gives you the precise woodcutting repeatedly whenever you are working. With this, you will get the equivalent measure of pieces with no misuse of the wood.

4. Constructing Sharp and Perfect Edges

Cutting smooth and narrow piece is no doubt a daunting task – and this can be a little harder for you. However, with the help of wooden routers, you can do it easily for a much shorter time. They are designed to give perfect sharp and edges to your pieces of wood and other materials.

5. Molding Styles

They can as well be used in your joinery to create state of the art design.  With this device, you can create any state of trim for windows, entryways, or baseboards.

6. To Easily Cut the Dadoes

The dado is the base on which another table or cabinet can be created. With a wood router, this becomes seamless.

Addressing the Controversies

Type of Wood Router

1. Plunge Routers

Plunge routers come with spring base loaded, which enables you to push the bit into the wood. At times you can have the base lock at different base contingent upon the application you are using it for. If you need to change the depth while using the router, simply unlock the connection in depth.

This is one of the primary contrasts between a plunge router and a fixed base router. Another distinction and potentially the upside of this wood router is that it cuts in the center and not the edge of your work.

2. Fixed Base Wood Routers

This is obviously the best option for newbies into woodworking. Remember that this tool is best used when mounted on the router’s table. It is a handy tool if you are looking for an exact cut and merge. You can also cut anything that requires a straight line.

These routers are easy to use and lightweight, especially with respect to routers in the wood.

Best Wood Routers 2020

 

1. Makita RT0701C 1-1/4 HP Compact Router  – Most Versatile

Makita RT0701C is an elegant, compact and flexible wood router that works exceedingly well with a 1.25 horsepower which comes at a low-cost. It has a speed control of 10,000 to 30,000 rpm; it is made from high-quality materials and offers excellent accuracy.

It is a popular router solution that has quickly found its place in many garages. In this way, it can be easily be adapted to any routing material, and the transition from one speed to another is very instinctual and easy to implement.

The electronic speed control likewise safeguards the sturdiness of the device included which takes into account consistency in speed under load, and thus reduces the start rotation. This trademark, thus, takes into consideration anticipation against wearing out of the item.

This wood router is also accompanied by a soft start, which ensures that the engine torque is reduced to allow easier operation. Moreover, this model has an uncommon electronic speed load hardware that will dependably deliver a straight speed.

The reason for this is to convey a first-rate and increasingly expert completion – regardless of whether you are performing trims, cuts, or drilling gaps.

Pros

  • The thin structure makes it a perfect fit for small projects
  • A small base makes it stress-free to reach the edge of the device
  • The soft starter provides better control of the router
  • The engine brushes are reachable and can be viably cleared and replaced.

Cons

  • The On / Off switch has no dust protection, making it difficult to examine
  • The motor drops each time the bottom is not closed, which will cause problems of fine-tuning of the depth
  • Absence of a LED

 

2. Triton TRA001 3-1/4 HP Dual Mode Precision Plunge Router – Best for Heavy Duty Project

The Triton TRA001 highlights an incredible double mode with a three ¼ inch HP engine. This engine can deal with probably the hardest of tasks with its powerful engine which keeps running at 8,000-21,000 RPM.

This router has been designed for seamlessly operation, and comes equipped with a three-organize turret for increasingly exact preset cuttings, and furthermore makes it simpler to use.

One thing that’s has undoubtedly been the core of the Triton’s way of thinking since the mid-1970s is—precision. Triton is acclaimed to have been household producers of the world most innovative instruments as well as industry-grade electrical machines to help better your joinery experience.

Another exciting feature is that with a huge and incredible router like the 3-1/4 HP Triton TRA001, there is no joinery project that will be too difficult to scale for you. The programmed axle lock makes it conceivable to change the bits utilizing one wrench, and there is additionally an auto shaft lock that creates a shift in bit quick and simple.

What’s more, the Triton wood switch likewise has a smaller scale winder for little profundity alterations and furthermore to take into account through-table modification when utilizing the Triton for some stationary applications.

Pros

  • A single button base switching
  • Programmed shaft lock
  • The start button is soft
  • Upkeep of its electronic speed

Cons

  • The position of the power switch isn’t advantageous
  • The device has a huge and overwhelming handheld use
  • The material is shoddily

3. GRR-RIPPER 3D Pushblock – Best for Finesse Project

A decent pushblock gives better direction on various kinds of saws. Nonetheless, does the GRR-Ripper 3D Pushblock have the highlights and solidness to hold up under intense working conditions.

The GRR-Ripper Push Block offers a straightforward, yet adaptable structure which makes it attractive for table saws, router tables, and so forth. Plus, the flexibility of the GRR-Ripper Micro Jig implies it very well may be utilized on a few saws whenever it might suit you.

It’s fundamental for unrivaled exactness, control, and safety on your table saw and other real carpentry hardware. This incredibly made GRIP-RIP gives you the total command for general control work. GRR-RIPPER comes equipped with three legs that allow you three work directions on your pieces.

With is downward pressure, you can be sure that kickback is eliminated while its inward force ensures the stock is being held firmly, against the fence and increasing forward force to thwart burns.

Pros

  • Protect your hands and avoid kickback like never before.
  • Strong and powerful hold for an extreme grip
  •  Cut precisely with good direction up to 1/4 ” ripping
  • Completely flexible for simple control

Cons

  • You may at a time remove saw guard to use the device
  • It screw occasion get stripped

 

4. Ryobi P601 – Best for Accurate Output

The RYOBI P601 18-Volt Trim Router gives up to 29,000 RPM to productive trimming force. Its compact design simplifies accuracy, and the aluminum base gives broadened precision and firmness.

The gadget is well-matched with ONE+ 18V lithium-particle batteries from Ryobi, and the cut profundity can be balanced per your particular needs. The router base is fixed for a definitive unwavering quality, and the gadget gauges an insignificant four pounds. It has numerous base alternatives for extended utility.

Unlike other router changing of its bits is genuinely easy and direct. You may need to rotate the RYOBI cordless trim over so that it sits on a level surface, to give simple access to the collet and bit. Since it doesn’t have a rope to unplug, it’s important you obliterate the battery while swapping or evacuating bits.

Also, it has a simple to utilize locally available handles, which permits tweaking the in-depth penetration of your cuts. It likewise has ID markings so that you can express the exact depth of your project or work.

Pros

  • One-speed router
  • Easy to use
  • It is cordless
  • Trim rapidly and effectively.
  • You may handle it one hand due to its lightweight

Cons

  • It has a small handle.

 

5. Makita RP2301FC  (Variable Speed) – Best for Quick and Efficient Results

Makita’s creative innovation and top tier highlight made this router one of the best. Its LED light provides brightness to your workplace and enhances clarity. Perhaps, you work in a dim spot or don’t see clearly, at that point Makita’s LED light supports become handy.

It comes with a ground-breaking engine which is 15 Amp, labyrinth-ducted fan which executes projects rapidly and proficiently. It likewise gives consistent speed under change variable speed from 9000-22000 RPM for smooth steering.

Another exciting, valuable component is its soft start feature which progressively creates a smooth start. Of the things that make this router prevalent is its extraordinary performance. Others included highlights are variable speed, electronic speed control, and brake.

It has an increasing 0″- 2-¾” depth which seamlessly allows penetrating of almost any joinery works like carpentry, cabinetry, and windows more. By the way, the straight metal ball conveys the smooth dive activity.

It has a large ball bearing and inbuilt fan coupled, which limit the number of residue entering the device for longer apparatus life. This work simply by when the residue extraction framework shields the waste from entering the machine and from keeping the router perfect and clean.

Pros

  • It has three presets for accuracy.
  • Shaft lock for snappy and simple bit changes
  • It has a template guide for the no-brainer installation process
  • With a variable speed, you can control it speed

Cons

  • It is a bit pricey

 

6. Bosch 1617EVS Fixed-Base Router – 12 Amp Cords – The Most Portable

If what you are searching for is a onetime purchase router then this ground-breaking 2-1/4 HP engine makes the Bosch 1617EVS a standout amongst the best-fixed base routers out there, and it is likewise a flexible powerful instrument on account of the variable speed that reaches somewhere in the range of 8,000 and 25,000 RPM.

With the propelled speed control innovation on this fixed base router, you can be sure of steady speeds all through the cut. The adjusted hardwood handles on the base boost operator control and furthermore makes the router easier to work with, whereas the robust aluminum base makes it an exceedingly strong and great device.

It noteworthy that it other highlights like the totally dust-fixed power router, 1/2 and 1/4-inch self-discharging collets and the way that it accompanies by mounting equipment likewise help to make this an extraordinary medium size router.

Pros

  • Comfortable rounded hardwood handles
  • Variable speed for flexibility
  • Soft start feature
  • Keep set RPM for reliability
  • Sturdy, tough aluminum base
  •  Curvy hardwood handles

Cons

  • The base plate isn’t transparent

Conclusion

At this juncture, I hope our journey through the promised land of helping you with breaking the daunting task of choosing the best wood routers have come to fruition.

Moreover, I make bold say that by now, you have at least an idea on what, how and many other things a wood router is as well as capable of, to this I say, choose you now, my good friend!

Table Saw Vs. Circular Saw: Which One Do You Need More?

The table saw and the circular saw are probably the most popular tools that any woodworker would need for most of his project. Also if you start building your tool collection, these are the tools that you should consider buying first and foremost. For many people, the choice of table saw vs circular saw is quite simple. They would go for a circular saw and think that they wouldn’t need to buy a table saw.

But does it as simple as that? Well, it is worth knowing that each woodworking tool is designed to do a specific task. They simply couldn’t interchangeable or replaceable. That is the reason why, for a specific task, you need to find the most suitable tool. Only when you are able to do so, you can finish your woodworking project efficiently, easily, and quickly.

So if you are considering between 2 types of tools- the table saw and the circular saw, don’t quickly come to your own decision without any justification. Take a look at the short article below for the comparison with these two types if you want to make a more informed choice.

Chop Saw Vs Miter Saw – Which One Should You Use?

For many people, the chop saw and the miter saw are basically the same things. People get confused because these two tools look quite familiar. However, that is not true. While these two power tools have some of the same functions, they are two entirely different units. Each of your specific needs might be more suitable with different power tools.

That is the reason why you need to understand the key features of the miter saw and the chop saw in order to choose the best tool. Take a look at this article below for the comparison of the chop saw vs miter saw as well as the pros and cons of each of the tools. Hopefully, at the end of the article, you would be able to decide on which tool- the miter saw or the chop saw- that you should buy.

Circular Saw Vs Miter Saw: Which One Is Better For You?

In the heated debate about which tool is better, circular saw vs miter saw, there is so single definite answer. In fact, we couldn’t say that the circular saw is better than the miter saw or the miter saw is better than the circular saw. Simply because they are different tools and we couldn’t compare apples and oranges.

So provided that you start working on a woodworking project or building a workshop, and you are thinking about which tools to buy. A circular saw or a miter saw, which one is better for you?

You have come to the right place. This article will clear up some information about the circular saw and the miter saw, telling you more about what these tools can do and which one is the most suitable for you.

Bosch Vs Dewalt – The Comparison Between 2 Of Our Favorite Brands

In case you are searching for a power tool- like a circular saw or a table saw, there are a lot of factors that you need to consider. You need to look at the power, the capacity, as well as the efficiency.

But how do you know that the tool that you are going to buy have all of the characteristics that you would need? You take a look at reviews of the best models available in the market, and you consider some of the most famous brands.

Take a look at some reviews of the best power tools on the market. You will see that most of the lists will be dominated by some famous brands. Two of the most common names including Bosch and DeWalt would come up.

They are all the brands which have been established for a long time and are still running well with their high-quality and highly-rated pieces of machinery.

Still, they have their own pros and cons with different features. Take a look at our guide below to see in the battle of bosch vs dewalt, which brand will win.

Band Saw Vs Scroll Saw: What Should You Buy?

A band saw or a scroll saw is one of the most popular stationary power tools. They all help you to cut curves smoothly and accurately. Still, they have different features, pros, and cons. In case you are looking for such a tool to cut curves, which one should you buy? A band saw vs scroll saw. It is essential that you know about the main differences between these tools as well as your specific needs and preferences.

Check out our article below to see what separate a band saw from a scroll saw and their advantages and disadvantages.

How To Bend And Cut Rebar

Rebar is a form of steel concrete reinforcing bars which are widely used in constructing and forming building structure. It can also be used for reinforcing concrete work. While the rebar is tough, it can be easily bent for it to be used in landscaping as well as other art projects.

There are several types of rebar with different sizes. One of the most common types of rebar which is used by DIY hobbyists is the #4 rebar. It is ½ inch in diameter. With this rebar, you can use a hacksaw to cut. On the other hand, with a bigger rebar, possibly the one that is used in industrial concrete work, you would have to use hydraulic shears or benders for the job. A cutting and bending machine is also a great choice for you if you want to cut a lot of rebar in a short amount of time.

Continue reading
1 2 3 6