Archive

Category Archives for "Reviews"

Band Saw Vs. Scroll Saw: What Should You Buy?

A band saw or a scroll saw is one of the most popular stationary power tools. They all help you to cut curves smoothly and accurately. Still, they have different features, pros, and cons. In case you are looking for such a tool to cut curves, which one should you buy? A band saw vs scroll saw. It is essential that you know about the main differences between these tools as well as your specific needs and preferences.

Check out our article below to see what separate a band saw from a scroll saw and their advantages and disadvantages.

The Main Difference Between A Scroll Saw And A Band Saw

The main similarity between two types of saws is that they can be used to cut curves. However, they are quite different, in their overall sizes, the sizes of the blades, the powers and the capacities.

  • In general, a band saw is a bigger type of saw in comparison with a scroll saw.
  • The blades of the band saw are longer than the blades of the scroll saw. The blades of the band saw are also thicker. Typically, they are 3/8 inches or more in width. On the other hand, the width of the scroll saws is about 0.25 inches. In addition, a typical scroll saw’s blade is about 5 to 6 inches in height while a typical band saw’s blade is  6 to 12 inches in height.
  • These types of saws are also different in the movement of the saw blades. The blades of the scroll saw move up and down to cut while the blades of the band saw rotate around the rubber wheels to cut.
  • In term of power, the scroll saw is not as powerful as the band saw. The band saw can make much more vigorous cuts. Hence, these cuts would be rougher than and not as smooth as the cuts made from the scroll saw.
  • Prices can vary a great deal among different models of band saws and scroll saws. However, an average band saw along with its accessories is more expensive than an average scroll saw and its accessories.
  • Since the power that a scroll saw consumes will be less than the level of a band saw, the scroll saw is more energy efficient.
  • A scroll saw is also known as a specialty saw while a band saw is known as a versatile saw.

Scroll Saw

Pros

  • A scroll saw can help you cut small curves- some can even help you cut the curves as small as the head of a pin. Not only that, a scroll saw can help to cut thin pieces of material, which are about 1.5 inches in thickness.
  • Delicate patterns including turns or twists are easier to make on a piece of wood using a scroll saw.
  • In addition, a scroll saw can produce smooth and thin edges without losing a lot of bits of materials. Think about making a set of puzzle, this ability of the scroll saw makes it easier for you to make a puzzle.
  • It is the best when it comes to having tight cuts so that you don’t have to sand the edges of the cut pieces.
  • Another advantage of a scroll saw that a band saw couldn’t do is that it can help you cut a shape right in the middle of a piece of plywood. A band saw will cut right through it. However, with a scroll saw, you can drill the holes first before threading the scroll saw along the shape you want to cut, making internal cuts possible. As a result, you can make an inner circle easily. There is no entry and exit cut- which a band saw couldn’t do.
  • Last but not least, thanks to the foot pedal, you can operate the saw without using your hands. Your hands are free to handle the material safely and securely.

Cons

  • Even the most powerful scroll saw has a narrow saw blade. As a result, it couldn’t make much neat straight long cuts like what a band saw can do.
  • It can only cut a piece of material which is less than 0.75 inches in thickness.
  • In addition, a typical scroll saw can cut much smaller and tighter circles than a band saw can.
  • It cut can pieces of wood more slowly than the band saw can cut.

Band Saw

Unlike the scroll saw, the band saw is more suitable for cutting a thick piece of plywood or so.

There are several types of band saws and each of which is made to do different things. These types of band saws include benchtop band saws, stationary band saw, and resaw band saws.

Pros

  • Benchtop band saw: This type of saw is the smallest and most portable type of band saw. You can consider buying this one if you want a band saw that you can easily bring it to your work site. If you don’t have much room in your working station, a benchtop band saw would be compact enough. It can help you cut big curves on many thick pieces of materials such as plywood or solid wood.
  • Stationary band saw: If you need to cut thicker and harder pieces of wood than a piece of plywood (such as the oak, pecan, and hickory). In addition, if your woodworking project has a lot of rip cuts instead of the tight curve cuts, this kind of band saw will provide the best cuts.
  • Resaw band saw: This is the biggest and most powerful type of band saws. It can make straight cuts as efficiently as curved cuts.

With a wide range of types of band saws and the sizes of the blades for you to choose from, this type of saw is universal and versatile. It helps you cut pieces of materials of different thickness.

Last but not least, you can modify the band saw to make it operate like a table saw by clamping a fence to the working station.

Cons

  • Overall, all types of band saws couldn’t cut cleaner and smoother cuts. Hence, they are not suitable for any project that requires the precision in the small details.
  • Since the blades of the band saw are fixed, it couldn’t cut on the inside of a piece of material.
  • With a large radius, a band saw’s blade couldn’t turn as sharp as the scroll saw. Hence, the details made with the band saw are not as sharp.

How To Decide On Which Tool To Buy?

After you know about the differences between a band saw and scroll saw, you need to think about your preferences as well as the nature of your projects in order to choose the best stationary power tool.

Think about your project: Do you often work with big projects like curved furniture, cabinets, or molding? Or do you often work with small projects like making puzzles or doing a craft project that need precision for small details?

If you often work with big projects and thick pieces of material, a band saw is the better option for you. On the other hand, if you need a tool for cutting small and thin pieces of material, a scroll saw is a suitable choice. If most of your woodworking project are crafting, you should consider buying a scroll saw instead of a band saw.

Since both tools are quite opposite in capacities, many professional woodworkers use both tools for different projects. However, if you don’t want to spend a lot of money on buying many tools that you are going to use just for a few times, think about what you need more.

For many DIY hobbyists, when they start working on their projects, they decide to buy a scroll saw first. First of all, a scroll saw can do an internal cut while the band saw couldn’t. Second of all, most of us tend to work with smaller projects first to gain more skills and experience before we move on. When they start gaining more skills, they move on to bigger projects. And they decide to purchase a band saw after all.

Conclusion

I hope that this small article helps to answer your question: “Should I buy a scroll saw or a band saw? Overall, they have different features and different capabilities. The scroll saw is better if you often work with small pieces of materials and the band saw is better if you work with much better pieces of equipment. If you work with both, you need to trade one off for the one that you will need more.

Sidewinder Vs Worm Drive – What Type Of Circular Saw You Should Choose

The circular saw is undoubtedly one of the most popular power tools that any home or commercial workshop has. When you start building your own workshop, the first tool that you need to think about is, of course, the circular saw. In order to choose one, there are a lot of things that you need to choose from including the type of the circular saw or the blade size, to name just a few.

I have seen many people being confused about worm drive vs. circular saw while in fact; the worm drive saw is just a type of circular saw.  Let’s learn more about the worm drive and the other type of handheld circular saw as well as the most important features you need to consider when choosing a circular saw.


The Difference between the Sidewinder and the Worm Drive Circular Saw

As I mentioned above, there are 2 main types of handheld circular saws which are the sidewinder and the worm drive type. They are mainly different in the mechanism and the design of the motor.

  • A sidewinder circular saw can have the motor on the right side or the left side of the blade.
  • On the other hand, a worm drive circular saw has a motor which is situated behind the blade. The first model of the worm drive circular saw was invented in 192 and the most popular brand of the worm drive is the Skil Model. The brand is so popular that many people mistake it as the Skil saw and consider it one of the types of saw that you can buy on the market.

With the information about the design of the motor in mind, we will discuss in more details about other differences between the sidewinder and the worm drive circular saw.

1. Weight and design:

With the motor which is placed behind the blade, the worm drive saw is typically heavier than the sidewinder saw. The sidewinder saw is generally lighter and generally more compact in size. However, such worm drive saw would be narrower in size when compared with other sidewinder saws.

2. The speed of the blade: 

Normally, the worm drive saw can spin at about 4000 to 4400 rpm. The sidewinder saw will spin at about 6000 to 6200 rpm, slightly faster than the worm drive saw. This is because the motor of the sidewinder circular saw is in line with the spinning blade. With the faster speed, you would have less torque for tougher cuts.

3. Right Hand Or Left Hand Option: 

The worm drive saw only has 1 single choice of design while the sidewinder circular saw has 2 options- with the motor on the left and the motor on the right. Hence, if you are a left-handed carpenter, you might find the sidewinder circular saw with the motor on either side of the blade much easier to use and control. It is also worth noting that for many carpenters, the motor which is located on either side of the blade of the circular saw will make it much harder to see the line that you want to cut. Hence, if your dominant hand is the right hand, you will want to buy a sidewinder circular saw with the motor situated on the left hand side of the blade. On the other hand, if your dominant hand is the left hand, it would be easier for you to use the sidewinder circular saw with the motor situated on the right hand of the blade.

4. Safety: 

There are many factors that contribute to the safety of a type of circular saw. First of all is the weight of the tool itself. A lighter and more compact tool would make it easier for you to control, hence, would make it safer for you to use. In this case, the sidewinder circular saw would be considered safer, especially when you need to work overhead. Second of all, you need to ensure that your hands are kept at the safe distance when you operate the tool. With this in mind, when you handle the sidewinder circular saw, you would be able to keep your hands far away from the motor and the blade, making it also safer for you to use this type of power saw.



Other Factors That You Need to Consider When Choosing a Circular Saw

1.The Bade Size:

The size of the blade of a circular saw refers to the diameter of the blade. If you are looking for a versatile circular saw that can cut through most of the materials, go for the blade with the size of 7 inches and more. Not to mention that with the average size of 7 to 7.25 inches, you would be able to find many types of blades as well.

2. The Types Of The Blade:

Besides the size of the blade, you also need to consider the design of the blade as well. One of the most common designs is the one with the carbide tipped teeth. That design makes the blade very versatile and functional of cutting many types of materials. On the other hand, if you know exactly what types of materials that you often work with, including wood, metal, or title, you can buy the one which is made specifically for cutting these types of materials. The number of the teeth is also one thing that you need to consider as well. Basically, the more teeth a blade of a circular saw has, the cleaner the cuts you would have. You can plan on buying a few blades as changing them for your own needs and requirements will not take you a lot of time.

3. The Power:

You would know how powerful a circular is by looking at the amperage specification of this tool. For the handheld circular saw, including the sidewinder and the worm drive type, the most common amperage is from 10 to 15. The more powerful the circular saw is, the better it is to work with different types of materials and the more efficient it is when you need to cut a lot of materials.

4. The Corded Or Cordless Option:

Last but not least, you should also consider if you want to buy a cordless circular saw or a corded one.  They have their own pros and cons for your consideration. For a cordless circular saw, you don’t have to worry about finding a power source to make the tool work. You can bring it around to anywhere you want to. However, a cordless circular saw is quite expensive. If you have a workshop and work mostly inside it, you don’t have to spend extra bucks of money for a cordless circular saw. Some corded circular saws come with very long cords as well for your convenience. However, they will never be as convenient and portable as the cordless circular saws. Another thing to consider is the power of the cordless or corded circular saw. Cordless circular saws might have limited power due to the limited batteries. Hence, you should use the cordless circular saws if you want to cut wood only.

5. Price:

If you have little experience in choosing any power tool in general, not to say the circular saw, maybe one of the most reliable factors you can use to choose a circular saw on the market is the price of the model that you want to buy. In general, the price of a sidewinder circular saw with a decent quality could range from around 100 dollars to 150 dollars. A sidewinder circular saw which is less than 100 dollars could be not so durable or powerful enough. On the other hand, the worm drive circular saw will be more expensive in general. You should expect to pay at least 200 dollars for a high quality worn drive circular saw.

6. Safety Features: 

Furthermore, you need to ensure that the circular saw that you are going to buy has a safety switch and the blade guard.

7. Other Things: 

Different types of circular saws on the market come with different weights and sizes. It is the best that you can experience each of the tools yourself. Check if the handles of these tools are comfortable in your hand. You also need to check if you are comfortable with the weight and the way the circular saw balance itself. A tool is suitable for you only when you feel comfortable handling it.


Conclusion

So as you can see, the sidewinder circular saw is lighter and capable of spinning faster than the sidewinder circular saw. In addition, it is also cheaper. Hence, if you are thinking about buying a circular saw for your workshop at home, you should consider a sidewinder circular saw first. Also, if most of your work requires working overhead, you can consider buying a sidewinder circular saw.

Here are just a few basic things that you need to know about the sidewinder and the worm drive circular saw. I hope that with all of the information above, you would be able to understand a bit more about the circular saw as well as the most important factors that you need to consider including the blade size and the power of the circular saw. With such information in mind and careful consideration, I am sure that you would be able to find the most suitable circular saw for all of your own needs and requirements.

Jigsaw Or Circular Saw – Which Is The Right Tool For You?

Undoubtedly, the jigsaw and the circular saw are among the most popular power tools that you can find in workshops and garages. They are both powerful tools which you can use to perform a lot of different tasks. If you are searching for the first tool to buy, many people would recommend the circular saw. Some would recommend the jigsaw. So what tool is the right tool for you, jigsaw vs circular saw?

Check our guide below for the features of the jigsaw and the circular saw. Also, learn about what they can do and the main differences between these tools in order to decide whether they are the right tool for you.

When Will You Need To Use The Jigsaw?

The jigsaw, which is also called the saber saw, is made with a motor and a reciprocating saw blade. The blade of the jigsaw is thin and narrow which moves up and down in order to cut through a piece of material. Overall, the jigsaw is a handheld type of saw.


Here is the list of what you can do with a jigsaw:

  • The jigsaw is a very versatile power tool. With this tool, you can do a lot of cuts- from straight cuts, to curves and circles. In comparison with the circular saw, the jigsaw is a better tool for you if you want to have curved cuts.
  • You can also perform inner cuts with the jigsaw, provided that there is a pre-drilled hole.
  • It can work on a wide variety of materials- from wood, metal, to foam and plastic. There are many choices of blades for you to choose on the market and different blades can be used to cut different types of materials precisely and efficiently.
  • It is small and portable, which allows you to carry the tool around without any difficulty. It also helps you with overhead work. And you can easily store the tool in your garage even if you have limited working station.
  • You can also mount this tool to a platform. This will help you to balance the materials throughout the cutting process in order to have smoother and more precise cuts.

What are the Main Drawbacks of the Jigsaw?

  • The jigsaw is not the right tool for you if you are looking for a tool for smooth and precise cuts.  If your project requires you to cut to the highest level of precision as possible, the jigsaw, which can only produce rough cuts, will not be able to deliver the job perfectly.
  • This tool is also not the suitable tool for finishing tasks.
  • Since it is a handheld tool, how much stable your cutting process is or how smooth your cuts are will depend largely on your skills, your experience, as well as your steady hands.
  • Last but not least, keep in mind that the jigsaw tends to bounce over. As a result, it is even more difficult for an amateur carpenter to move the blade along the line that you want to cut - as steadily and evenly as you might want.

When Will You Need To Use The Circular Saw?

There are several things that the jigsaw and the circular saw both have. Both of the saw are handheld and operate using power. However, while the jigsaw has a thin and narrow blade, the circular saw has a circular blade. As you can see, the designs of the circular saw and the jigsaw are totally different. Hence, it would be easy for you to tell these two tools apart just by looking at them. However, they share some similar characteristics, which might confuse you.

What are the benefits of using the circular saw?

  • Like the jigsaw, the circular saw is one of the most popular and versatile tools. It can perform a lot of cuts, especially straight cuts, and angled cuts quickly and efficiently. It can also be used o make rough rips and bevel cuts.
  • In addition, the circular saw can help you cut through a wide range of materials from wood, to tiles, metal, masonry, and pipes. Of course, it would depend on the blades that you have in hand.
  • You can use the circular saw for most of the DIY home projects such as making toolbox, masonry work, and roofing.
  • Many choices of blades of the circular saws that you can find on the market have more than 50 teeth. As a result, you would be able to have many smooth and clean cuts.
  • There are many choices of blades for you to choose from with a circular saw. For example, you can go with a big blade with fewer teeth if you want to have fast cuts. On the other hand, you can go with a blade with a lot of teeth in order to have smoother and cleaner cuts.
  • Last but not least, the circular saw is also a very compact and portable handheld saw. As a result, it is easy for you to carry the circular around as well as storing it in your small garage.

What are the main drawbacks of the circular saw?

  • The circular saw is the powerful tool only when you know which jigs you should use. For example, if you want to have the perfect 90-degree cut, you might need to use some extra tools for the task. It requires knowledge and experience.
  • It can lead to rough edges on the sides of the cut pieces of material.
  • It is not as good as the jigsaw in term of making curved cuts. The curved cuts made with the circular saw might not be as accurate and clean.

Which Is The Right Tool For You?

The choice of which tool- the circular saw or the jigsaw that you should buy as the first tool for your workshop depends on your personal needs and preferences. Both of the tools are the most popular and versatile tools that can help you deal with a lot of projects. If you can afford it, it is the best that you can buy these 2 tools that you will use a lot in the future. The reason is, while both of the tools are so versatile, there are some tasks and projects that the circular saw is a more suitable tool to use rather than the jigsaw and vice versa. For example, the jigsaw is a better tool for plunge cuts rather than the circular saw. In addition, cutting curves can be better done with the help of a jigsaw rather than the circular saw. On the other hand, in term of cutting straight cuts, no other tool is better than the circular saw.

So think about your projects and what cuts you would often have to make more. If your projects require a lot of straight cuts, you might consider buying the circular saw. On the other hand, the jigsaw would be the better choice for you if your projects require a lot of curved cuts and plunge cuts.

However, keep in mind that the circular saw or the jigsaw alone will not help you much with all of the tasks and projects. You need to have the right blades, the right jigs as well as a lot of experience in order to have the best cuts.

You might end up owing only 1 type of saw. However, if you know how to make use of other jigs and accessories, I am sure that you would still be able to make the most out of the tool that you have. As I have mentioned above, the circular saw is a better tool for you to make straight cuts rather than the jigsaw. However, if you have the jigsaw, you can still make use of the straightedge cutting guides. And you can still have curved cuts with the circular saw if you have the right jigs and knowledge for the needed tricks.


Final Verdict

No tool is better than the other tool. So the choice of which type of saw- the jigsaw or the circular saw to buy depends much on your personal preferences and requirements.

Still, no matter what tool that you are going to buy, you need to choose the one with a decent quality. It needs to be powerful enough for the projects that you want to do. And it needs to be durable and long-lasting so that your initial investment can last for a long time. There are many other things that you need to consider including the size of the blade, the size of the saw, the power of the saw, as well as the safety features of the tools.  As long as you spend enough time researching, I am sure that you would be able to find the most suitable tool for your projects in the future.

As you can see, both of the circular saw and the jigsaw are the most powerful and versatile tool. Still, they have their own strengths and weaknesses. The circular saw is better for some types of projects and the jigsaw is better for some others. They are not the same and definitely not interchangeable. I hope that with all of the information above, you would be able to choose the right tool for your specific needs and requirements. With the most suitable tools, I am sure that you would be able finish many woodworking projects and other projects in the future.

5 Best Router Lifts 2020 -What Brands Do We Recommend?

Professional and seasoned woodworkers find a router indispensable for completing a range of cabinetry and woodwork jobs.

Carpenters and woodworkers use both plunge-base and fixed-base routers for chipping out accurate ruts and grooves on hardwood and softwood surfaces. Nevertheless, most carpenters struggle to take good advantage of a router, especially when working without a template.

This is where a router lift can come to the aid of the woodworker, making the entire task considerably easier. A router lift is installed on the router table and helps in stably locking the router below the table, thereby minimizing the chances of error associated with freehand operation.

Experienced woodworkers are aware of the multiple benefits of working with a router when the woodworking tool is strapped to a router lift.

Continue reading

5 Best CNC Routers 2020 – Top Picks & Reviews

A Computer Numerical Control Router, popularly known as a CNC router is one of the most versatile power tools that woodworkers and cabinetmakers find incredibly handy. The CNC router, a computer-controlled woodworking tool, is chiefly used for systematically cutting a wide variety of materials like wood, laminate, plastic, and glass. The best CNC routers enable carpenters and woodworkers to produce beautiful furniture, cabinets, cupboards, and numerous other bespoke and DIY products from the above materials.

When it comes to producing factory-grade woodwork or customized metal engravings, then the best CNC router is indispensable. Before the advent of the CNC router, plunge router, and fixed-base router, woodworkers did all the cutting, incising, and engraving by hand. However, with the arrival of CNC routers, carpenters and woodmen were able to take full advantage of their craftsmanship.

The best CNC routers were able to do all the tasks that the woodworker did manually but with enhanced quality and precision. A CNC router can make the same cuts and engravings that humans do, albeit with greater accuracy because the machine is computer-controlled.  

Continue reading

Best Drill Bit for Porcelain Tile in 2020

There is nothing satisfactorily than maintaining the natural beauty of your tile, especially when they’re left untouched. However, you may decide to have a towel rack fix in your house porcelain tile or the need to replace a broken tile in your tile set may arise.

Although porcelain tiles are hard, still, they are prone to break easily when handled by an inexperienced or non-patient person. But, enthusiast and hobbyist find it easy to fix, only when they’ve the perfect tool within their reach.

The drill bit, if the best and exact one that matches the job to be done is purchased, can make the cutting and fixing of the porcelain tile easy.

What is a Drill Bit?

This is a circular cross-section cutting tool used to make holes in tiles and other materials. It is of different types, and available in varieties of shapes and sizes. Thisitem is easy to use and gives a professional cutting when used by a patient and experienced user.

How to Choose the Best Drill Bit for Your Porcelain Tile?

Getting the best tool that suits your porcelain tilecan be challenging, especially whenyou don’t have any prior knowledge about the tool. And that’s why we willbe provided you withall the necessary information needed to acquire the best drill bit for your porcelain tile, which are discussed in detail below.

Let’s begin!

What is the Bit Design?

Among the prominent features needed to consider before settling for your choice of the drill bit is to determine where to use the drill bit or what to use it for. This will lead us to the type of material used to design it.

Themost used types of the drill bits are the carbide and diamond type, each designed for a specific purpose.

1. The carbide bit

This isthe ideal choice for industrial works, due to its exceptional strong designed and quick drilling speed. Plus, it requires lesser pressure to cut through the hardest surface and its cuts are always smooth. However, if extreme care is not taken, it may sleep easily and injure your tile surface. Which is mostly considered as its downside.

2. The diamond bit 

Thediamond drill bit is strictly designed for DIYs enthusiasts as it’s safe to use and won’t cause anydamage to your tile. It canwithstand heavy duty usage bycutting all types of materials easily without tiring you out.

Also,  youwill find it easy tomakebigger holes on any type of materials to be drilled. In general, they are durable and deliver excellent results.

What of Shapes and Sizes?

Another paramount feature needed to consider when buying the choice of the drill bit is the style (shapes and sizes) of the drill. Present in our guide are the stronger carbide tungsten drill bit and the diamond drill, which are the most widely used drill. The diamond drill comes either has a core drill bit or blunt nose.

1. Core drill bit

These are strong and fast drill bits designed with a diamond lining at the edge. This will enable the material to be holed to exhibit the shape of the core other than exhibiting the shape of the entire drill bit.

The core drill bit is mostly suitable for towel racks installation other than porcelain tiles.

2. Blunt Nose 

The blunt nose is special drill bits designed for tile and porcelain decoration. The tip of this bit comes with lined diamonds including the edges and sides. They are capable of drilling holes through their body shapes.

What of Number and Size?

The number and size of the drill bit is also another factor to look into. The choice of bit sizeto buy is directly dependent on the size of the hole to be made on the materials. The size may be as small as 1/8 inch while some may even reach ¾ inch.

However, if you’re unsure of the size of the hole you intend to make on the material, buy the set drill bit instead of buying one bit at a time.

What of Budget?

Talking about the features without mentioning the price tag is incomplete. Although the price of the drill bit varies, however, all the product available in our guide are affordable.

There are some whose price tag is meant for thosewho have a deep pocket, still, users who value professionalism cannot afford to lose this kind of drill. This is due to their exceptional abilities and high-quality materials.

Is It Durable?

As an expert, all the available crafted drill bit in our buying guide will last you for a longer period. However, the extent of serving you depends on how often you use it and maintenance. To prolong the lifespan of the drill bit, you are advised to add water to it during drilling.

This will serve as a coolant and prevent overheating. However, on a serious note, a good tool should last you for years without harming you or developing a fault.

To save you time and effort, we’ve handpicked 5 of the best drill bits for porcelain tile available in the market, which are reviewed below.

5 Best Drill Bits for PorcelainTile

Image Product Name Best Feature

SHDIATOOL Diamond Core Drill Bits 2PCS 1/4 Inch

Best Overall

Bosch HDG14 1/4 In. Diamond Hole Saw by Bosch

Most Durable

Drilax Diamond Drill Bit Set 3/16, 1/4, 5/16, 3/8, 1/2 Inch Drilling Tile Glass

MostPocket Friendly

Drilax 30 packs SET 10 packs

Most Versatile

DEWALT Tile Drill Bit, Diamond Tip, 1/4-Inch (DW5572)

Most Unique

1. SHDIATOOL Diamond Core Drill Bits 2PCS 1/4 Inch Best Overall

The first and the best drill bit available in our buying guides are the SHDIATOOL diamond core. Suitable for all drilling style, this drill bit comes with a 2packs and 1/4 inch vacuum brazed diamond drilling. It also has a 5/8-11 connection which makes it suitable for porcelain ceramic tile cut.

Aside from this, this tool iscapable of drilling dry/wet porcelain tile marble stone, masonry brick, and normal stone,quick and perfect. This is made possible thanksto thediamond grain material used in designing it.

Again, its total height of 62MM, maximum working depth of 35mm, and diamond height of 10MM make users who value professional work crave for it. The drill is safe and easy to use as it comes with a wax that helps in cooling it.

This also protect the tilefrom getting fractured if less pressure is applied toit whiledrilling. Although this tool requires an adapter fitted to work perfectly, yet, you will get amazed with the quality of its service.

Pros

  • Easy to set-up.
  • Safe to use
  • Causes no breakage your tile if handled gently
  • Can work for a longer period due to its vacuum brazed technology.

Cons

  • Price is not friendly for low-income earners.
  • Cannot drill attachment found behind the tile.

2. Bosch HDG14 1/4 In. Diamond Hole Saw by Bosch Most Durable

Bosch products are widely known in the drilling community and Bosch HDG141/4 Inches is not an exception. This durable drill bit has more than enough features that overwhelm its price tag.

To begin with is its vacuum-brazed diamond grit cuts which make it cut/ drill faster and also enhances its durability. It incorporates a segmented tooth which helps to keep the environment clean by reducing debris, particles, and heat. You can remove the plugged material easily and quickly on this Bosch drill without any hassle.

In furtherance of its amazing features, it has has a returnable feature within 30 days of purchase. Contrary to most drill bit of the same price tag with Bosch product, it is easier to set-up and givequick results. Itwill quickly cut through the hardest materials including porcelain, granite, and others without developing any fault.

Again, irrespective of the design you want to make on your tile, the quick change universal hole saw a system of this Bosch drill allows you to change to any size or type of hole saw. Within a short time frame.

Pros

  • Well built and durable.
  • Can work in many Jobsite without compromising qualities.
  • Has flutes that continuously supply water to the bottom of the hole.
  • If used with patience, there won’t be any sign of wear on the diamond cutting surface when you finish drilling.

Cons

  • Requires a special centre attachment that was not stated earlier on the package.
  • It is not affordable for extreme low-budget earners.

3.​ Drilax Diamond Drill Bit Set 3/16, 1/4, 5/16, 3/8, 1/2 Inch Drilling Tile Glass​ – MostPocket Friendly

Drilax is a cheap, yet, easy to set-up diamond set drill with 3/16, 1/4, 5/16, 3/8, 1/2 Inch sizes. This different sizes of this drilling tool make it unique and useful in drilling  holes ofany size in tiles. Also, it’s extended length makes it possible to drill thicker and harder tiles easily, which some bits find difficult to do.

However, for safety and accurate result, it is advisable to read the guide or start at an angle. You also need to add coolant (water) to it at the interval whiledrilling. This will make it cool throughout drilling thus, preventing breakage of tiles and also enhance ease of drilling.

This drill bit can fit into standard cordless rechargeable, corded electric drills, upright, and other rotary tools perfectly. This makes it useful in any location and sites. Just like few other good drill bits, Drilax can also cut porcelain tiles, granite, ceramic, glass, marble, slate, and many more stone types easily without using a pilot drill.

Lastly, to fully exploit this tool, it is advisable to use protective.

Pros

  • It is an ideal of drill choice for low-income earners.
  • Doesn’t require centre pilot holes.
  • This drilax toll can also drill thicker object without any hassle.

Cons

  • If water is not constantly supplied, this electroplated diamond coating tool will get hot and wear off.

4. Drilax 30 packs SET 10 packs Most Versatile

Just like the former Drilax drill bit, Drilax 30 packs is a more stableand versatileas it has 1mm 10pcs, 2mm 10 pcs, and 3mm diamond drill bit. It has a cylindrical burr kit jewellery beach sea glass shells and gemstones lapidary 30pcs of 1 mm, 2 mm, and 3mm (1/8″).

This makes it a valuable drill bit for jewellery designers and other users who are into clean holes drilling.However, this tool must be used carefully and submerged in a little pool of water to avoid damaging your tile. As it is very strong and fast in drilling action.

JustlikeotherDrilaxdrilltools, it can be used with an electric cord, cordless hand drills, flex shafts, upright drills, and rotary tools. Regardless of your financial capacity, you will surely make it in purchasing this tool as it is affordable.

Pros

  • Versatile and stable.
  • Affordable.
  • Suitable for beach glass, jewellery necklaces earrings, bracelets with seashells, and pendants design.

Cons

  • Doesn’t come with sufficient information needed to couple and use it.
  • If you’re not experienced or patient enough, you may break the porcelain tile while drilling.

5. DEWALT Tile Drill Bit, Diamond Tip, 1/4-Inch (DW5572) Most Unique

The last in number but not in function in our list of available drill bit product is the Dewalt tile drill bit ¼ diamond tip. This drill tool is unique that it is ranked among the best drill bits available in the market and it comes with a guaranty period of 30 days.

The presence of the diamond welded tip of this drill gives it extra-strength and adds to its durability. It incorporates a reverse spiral thread that enhances the continuous outflow of water and increased speed. All these work together to complement functionalities.

Talking the unique feature of this drill bit without mentioning its core ejection slot is incomplete. This helps to remove any dirt and also prevent it from repetitious holing.

Note: users must have in mind that this drill is only useful while using it with water, otherwise, it will cause damage to the tile being drilled.

Pros

  • Extreme patience must be taken to have a nice cut
  • Requireslittlepressurebutanadequatesupplyofwatertodrilleasily.
  • Features a returnable policy within the first 30 days of purchase.

Cons

  • It may take several minutes to drill some harder materials to end.

How to use the drill bit on porcelain tile

1. Pre-drilling

Now that you’ve acquired , the best drill bit for your project, the next thing is to put on protectives. These will guarantee your safety throughout use and are:

  • Apron which is used for the prevention of dirt in gaining entry to your normal inner kit.
  • A pair of safety goggles to prevent you from any eyes hazard.
  • A pair of gloves
  • Head cover, and the booth is also necessary.

    After puting on these protective gears, you can then proceed to unpack the purchased drill bit. Also, the subsequent reading of the manual will help you understand how to use the tool, especially if you’re new to drill bit usage.

    Then put some materials like drop sheet, lubricant, and masking tape in place. These materials are designed to ease your job, complement your safety, and extend the life span of the tools. They will also save the tiles from getting damaged.

    2. The Drilling Process

    Step one

    Begin the drilling process by first measuring the exact place to be drilled with subsequent marking using the masking tape. This will give you a smooth and perfect drill has it prevents you from drilling outside the marked area.

    Also, other materials like drop sheet are used to keep the environment clean and tidy by collecting dust and other particles during drilling. And again, you will need to apply lubricant which serves as a coolant for the drill tip. The coolant also helps in preventing the tiles from damages by averting overheating.

    Step two

    After this, you can then use the drill bit to break through the harder outer surface of the porcelain tile. Mind you, extreme care must be taken here as the drill bit is always sliding in nature while the tile is also smooth. Otherwise, you’re risking breakage of the tile or getting an unprofessional job done.

    Step three

    After this, you begin the drilling process by holding the drilling machine firm and apply pressure. Start drilling at a very slow speed, then increase it gradually to the medium speed. But don’t exceed the medium speed to avoid negative consequences.

    However, as you drill, pause at the interval and add water to the tip and the part to be drilled to make it cool. This will prevent unnecessary breakage and fracture of the tile.

    Also, always keep a close watch at the porcelain and stop only when you’ve gotten to the backside of the tile. Once you reach here, you must be vigilant and extremely cautious in drilling through the mounting surface of the tile.

    N.B: Be careful not to rest on the already drilled tile if you’re fixing wall rack. Otherwise, the tile will crack. Also, here’s a video on how to use a drill bit on porcelain tile.

    Frequently Asked Questions

    Must I use lubricant during drilling?

    Yes, it is a must to use lubricant during drilling of porcelain tile. This will help to prevent overheating which may cause breakage and/ or leave an unprofessional cut. This is because the lubricant helps to cool the drill tip.

    Aside from this, it also keeps the environment clean by forming paste and binds the accumulated particles and other dirt.

    How long does it take to finish drilling a tile?

    There is no specific answer to this. As this depends on how patient and experience you are. However, from a general point of view, the average drilling of tile should be within the range of 4 – 6 minutes. For an average thick tile. However, thicker porcelain tiles may attract additional time.

    Coclusion

    We have come to the end of the guide and we are pleased to form you that the best drill bit for porcelain is the one that durable and delivers a professional cut. However, before you buy one, it is advisable to know where you want to use it, either hard or frequent work, or for a mere job.

    In general, you shouldn’t forget that during drilling, the addition of water should not be underestimated. This will prevent damage that may arise from overheating has it serves as a coolant and also makes the cutting of the tile easy and friendly.

    Our best drill bit pick for the best porcelain drill bit is SHDIATOOL diamond core drill bits. This tool is durable, versatile, safe to use, and can cut different materials within a short time frame. Aside from this, its end drill and cut is smooth and little pressure and knowledge are required to use and set it up.

    5 Best Trim Routers 2020 -Top Choices for Woodworkers

    Both seasoned woodworkers and carpenters who still have a long way to go on the learning curve will find a trim router extremely handy. The USP of the best trim routers is their ergonomic and lightweight profile, enabling them to be handled with one hand. The best trim router comes in perfectly handy for a professional woodworker, allowing him to complete the most complicated of woodworks with a flourish.

    A high-quality trim router can be used to trim not only laminated wood panels but also accomplish various other tasks. Some of these woodworking jobs include drilling holes, duplicating, sign engraving, chiseling full hinge mortise, and profiling edges. The best trim routers go a long way in altering every day and low-profile woodwork projects into elegant ones.

    Topnotch trim routers can be powerful and versatile enough to help you achieve even highly elaborate jobs, their small size notwithstanding. At the same time, trim routers need minimal storage space, thanks to their waist being lower than plunge or fixed-base routers. This guide reviews five best trim routers available in the market along with a buying guide, which will make it easier to choose the product you’re looking for.   

    Continue reading

    Best Drill Bits for Hardened Steel 2020

    The handmade goodies that can be created with a drill is beyond imagination. The drill for a DIYer, enthusiast or a professional, is a handy tool they can’t afford not to have in their toolkit.A drill without an appropriate drill bit is just a disaster waiting to happen and a misuse of this creative machine.

    Drill bits are of different types and sizes depending on the materials to be worked on. Majority of DIYers and enthusiasts make use of the regular drill bits with tapered points to work on woods, plastic and metal sheets.

    However, cutting through thick metals is another thing entirely.It requires some level of expertise and exposure as well as picking up the right drill bits. Without doubt, hardened steel and stainless steel are two of the most thickest metals out there.

    Drill bits that are needed to cut through hardened steel have some special characteristics and properties. It is dangerous practice to pick up a regular drill bit to cut through hardened steel or any other tough metal.

    Drill Bits for Hardened Steel

    As earlier stated, drilling through hardened steel might become gruesome and a kind of nightmare if you don’t come prepared. It requires the know-how and the right tools.

    Drill bits for hardened steel are made from extremely strong materials such as cobalt. They are astonishingly resistant to heat and can work under very high temperature. The tip of a hardened steel drill bit is usually coated and blunt.

    They are not the most fanciful but they get the job done. Using fanciful regular bits will most likely result in accidents as they are likely to break a few seconds into the job. Hence, for your safety and comfort as well as to protect the workpiece and drill, you need to get the drill bit that is fitting for hardened steel.

    So, how do you get the best drill bit for your project? Below are features to consider when choosing a drill bit for hardened steel, which are discussed in detail below.

    Features to Consider When Selecting Drill Bits for Hardened Steel

    There are many types of drill bits of varying styles, brands and specifications out there that it is so easy to mistake one for another. Though, it is worthy of note to say, the task of choosing the right drill bit for hardened steel only becomes complicated if you head into the market uninformed

    Here we have put together the features you need to consider in a drill bit to determine if it is the right tool to get the job done.

    1. Drill Bit Materials

    In order to efficiently drill through a hardened steel, you need a drill bit made with a material that is considerably stronger. This is due to the fact that the strength of the material will determine the durability and efficiency of the bit.

    Also, hardened steel is extremely wear and tear resistive, and as such, you will need a drill bit that can retain its sharpness for an extended period of usage.

    Below are some of the drill bits materials you will find in the market.

    • Soft Low-Carbon Steel: The cheapest amongst the materials used for hardened steel drill bits. As the name implies, it contains low percentage of carbon and needs frequent sharpening.
    • The durability of this type of drill bit is also low. If you are drilling through hardened steel as a one off Job, you can consider this type of drill bit. But if you are a professional and cut through hardened steel often, this drill bit is not advisable for you.
    • High-Carbon Steel (Carbide): These drill bits are very tough and durable. They are made tough through the hardening and tapering process.
    • They are well-suited with metals and hardwood. The only downside to this material is that loses its sharpness when it is exposed to high temperature for a long period of time.
    • High-Speed Steel (HSS): They are considerably better than the high carbon steel bits. They are harder, and notably more resistant to heat.
    • HSS drill bits are well-suited to drilling through hardened steel for an extended period of time and does that at high speed.
    • Cobalt Steel Alloys: It is abetter version of the high speed steel and one of the most reliable drill bits for working on hardened steel. As the name goes, they contain a high amount cobalt. Amongst all drill bits, they are probably the most suitable for drilling through hardened steel.
    • They can work under high temperature for long period of time without losing their sharpness or hardness. The only downside to cobalt steel bits is that, they are notably more brittle than other high-speed drill bits.
    • Tungsten Carbide: The most effective and expensive of all. They can drill through virtually any type of material. They also retain their sharpness, edge and strength longer than other types of drill bits.
    • Due to the fact that tungsten is very much expensive, they are majorly used as tip for drill bits that’s not as hard instead of being a whole drill bit. They are very strong, hence, they are used for the toughest drilling jobs such as production drilling.

    2. Coating

    The neatness and quality of the holes drilled by a drill bit is largely dependent on the coating.There are majorly three types of coatings that can be found on drill bits for hardened steel.

    • Titanium Nitride: One of the most efficient coatings that can be used to coat a drill bit. It is made of ceramic and increases the durability of a drill bit to two or three times the normal span.
    • It is usually used for coating of high speed drill bits. It is very hard and durable and well-suited to wear-resistant surfaces like hardened steel.
    • Black Oxide: A cheaper type of coating that has low friction and high heat resistance. It is also corrosion resistant which makes it durable and effective. It notably improves the durability and efficiency of high speed steel drill bits.
    • Bronze Oxide: Mostly used as a secondary coating to already coated drill bits. They can sometimes be found on black oxide coated drill bits.
    • Most times when you find a drill bit that carries a bronze oxide coating, it means it has a very high grade of high speed steel.

    3. Flute Design

    The deep groove-like indentations that is found around the drill bit is called the flute. It gives a way out to waste materials and provides a clearer view of your drilling activity.

    There are majorly two types of flute designs you can find on a drill bit; the parabolic flute design and the 30degrees angle design.

    For efficiency and neatness, the best type of design you can get for hardened steel is the 30degrees angle design.

    4. Shank Design

    The shank of a drill bit is the part that connects it to chuck of the drill. The firmness of a drilling operation is dependent on how well connected the shaft of the drill bit is to the drill.

    Majorly, the hexagonal and circular shanks are the most common types of shanks. The hexagonal shank is well suited to high speed and high power operations because the arms of the chuckis able to hold them tightly.

    The round shank on the other hand, is difficult to hold onto and can be slippery during high speed operations. Though, they can still be used if you can properly tighten the chuck.

    5. Drill Point Length

    The length of the drilling point varies with the type of materials you will be working with.

    For metals generally including hardened steel, a shorter drill bit is the most preferred. This is because they are closer to the surface, making them more rigid and accurate.

    A longer bit is at risk of breaking if it is used rigorously.

    6. Drill point Angle

    The widely accepted angle standard is 118 degrees. For faster drilling operations such as that of a hardened steel, a 135 degrees self-centering angle bit is the most suitable.

    7. Drill Bit Number

    The varieties of jobs you can do with a drill bit set is dependent on the number of bits in the pack. Some drill bits brands produces different models of drill bits based on the size and number of drill bits in the package.

    For an enthusiast or professional, a drill bit set with bits between the range 14 and 21 will do.

    It is advisable you get a product with higher number of drill bits. This gives you flexibility and saves you from the need of purchasing a new set entirely when another variety of job pops up in the future.

    8. Price

    Drill bits for hardened steel are usually more expensive than the regular drill bits. This is due to the types of materials that are used to manufacture them and the quality.

    The price of a hardened steel drill bit like other products is dependent on the quality and the style you want.

    It is advisable you get the best drill bit that suits the job even if it is a little be more costly. This will save you from accident and unnecessary stress.

    To save you from the headache of having to select a drill bit, we have selected and reviewed 6 of the very best available in the market.

    6 Best Hardened Steel Drill Bits

     

    Image Product Name Best Feature

    Bosch CO2144 17/64 In. X 4-1/8 Cobalt Drill Bit

    Best for Effortless Drilling

    DRILLFORCE 20-piece 1/8 inch Round Shank HSS M35 Cobalt Twist Drill Bits

    Best for Tough Metals

    DEWALT Black Oxide Drill Bit Set, 20 Pieces (DW1177)

    Best for Smooth Drilling

    Viking Drill and Tool Norseman 66820 Ultra Dex SPM-29 Drill Bit Set

    Best for Accurate Drilling

    IRWIN Drill Bit Set Cobalt 15-Pieces (316015)

    Best for Safe Drilling

    Chicago Latrobe 550 Series Cobalt Steel Jobber Length Drill Bit Set

    Best for Low-income Earners

    1. Bosch CO2144 17/64 In. X 4-1/8 C​​obalt Drill Bit – Best for Effortless Drilling

    Do you need a drill bit that makes drilling through metals as effortless as drilling through a wood? You can rarely get one better than Bosch cobalt drill bit. It is a fascinating drill bit that is suited to tough applications.

    This drill bit can effectively work under high temperature of about 1100 degrees farenheit without losing anything in its sharpness and strength. The design is a thick and rigid one which gives it the desired stability in extremely tough applications.

    The thick web helix removes materials with high speed and efficiency. It also gives it maximum durability (4 times the life span of regular metal drill bits) and a high performance level. Each bit incorporates a split point start without walking or skating i.e it only starts when it comes in contact with the work surface. This allows you to work without a center punch.

    Bosch cobalt drill bit is specially designed for drilling through hard and abrasive materials like hardened steel, treated-stainless, titanium, cast iron, light-guage metal and high-carbon steel.

    Pros

    • Durable and efficient.
    • Highly heat-resistant.
    • Does not slide into the chuck thanks to its triangular shank.
    • Drilled holes are neat.

    Cons

    • Needs to be sharpened often.
    • It sometimes needs to be lubricated for efficient drilling.

     

    2. DRILLFORCE 20-piece 1/8 inch Round Shank HSS M35 Cobalt Twist Drill Bits – Best for Tough Metals

    Drillforce cobalt twist drill bit is a highly efficient drill bit that cuts through tough metals with ease. The pack contains 20 pieces of 1/8 inch high-speed steel twisted cobalt drill bits.

    It is made with high quality HSS Cobalt M-35 steel material. This makes it effective in drilling hardened steel, stainless steel, mild steel, aluminum, copper and zinc alloy. It has a very sturdy design and produces a neat and finely finished hole.

    It has a 118 degree split point tip for efficient and comfortable drilling. The drill bit starts immediately it is powered and does not walk or skid on the workpiece. It also does not require excessive force to start drilling.

    In terms of durability, it is one of the strongest and most durable drill bits for hardened steel available. The shank connects to the chuck tightly, ensuring that it does not slip into the chuck and does not slip off during drilling.

    Pros

    • Sturdy and durable.
    • High quality materials and reliable.
    • Does not walk on workpiece.
    • Clean and neatly drilled holes.
    • Pocket friendly and effective.

    Cons

    • Measurement is a bit inaccurate.

     

    3. DEWALT Black Oxide Drill Bit Set, 20 Pieces (DW1177) – Best for Smooth Drilling

    Dewalt black oxide drill bit set is another high quality drill bit for hardened steel. The package contains 20bits of different sizes to suit your needs. It is has a rugged build that makes it amazingly strong and tough.

    This drill bit set is very easy to use and cuts through tough metals with relative ease. It has a 135 degree split point design that prevents it from walking and slipping on the workpiece. This allows it to have an effective and no slip starting. It make use of parabolic flute design to eliminate the particles. This in-turn gives them greater strength and ensures their longevity.

    The coating on these bits is black oxide coating. This gives optimum wear protection and ensures it works under high temperature without losing its sharpness and strength. It has a wide range of application as it can drill holes in wood, plastic, meta sheets, hardened steel and some other materials.

    Dewalt drill bit set comes in a tough case container which has a sliding soft grip lock. This ensures the 20 drill bits are well arranged and kept safe. The size of the bits in this set ranges from 1/16 inch to 1/2 inch. All in all, it is a great and reliable drill bit.

    Pros

    • Pocket friendly and easy to transport.
    • Durable, effective and very sharp.
    • Shank stays securely in the chuck of the drill.
    • High quality and dependable.

    Cons

    • Bits aren’t labeled.
    • Drill dex does not close.

     

    4. Viking Drill and Tool Norse​​man 66820 Ultra Dex SPM-29 Drill Bit Set – Best for Accurate Drilling

    Are you in need of a drill bit that drills hardened steel with as much accuracy as speed? You can rarely do better than Viking drill and tool drill bit set. It is made with insanely strong materials like the special Hi-Molybdenum steel which gives it its ultimate strength.

    The set contains 29 pieces of well crafted drill bits. They are tough and suitable for really hard metals like stainless steel and hardened steel. Each bit in the set is coated with gold oxide, which makes it wear-resistant and gives it an attractive look.

    The shanks of these bits have 3 flats. This holds it firmly to chuck of the drill and ensures it does not slip inside the chuck or remove during operations. It also features a 135 degree split point. This eliminates walking and skating and in-turn ensures accurate centering and quick, effortless penetration.

    Viking drill and tool drill bit sets have an impressive flute design that removes dirt from the drilled hole. This improves the durability of your drill bit and gives an accurate and finely drilled hole. The ground point and body are of precise measurements.

    Pros

    • Durable and very accurate.
    • Drills fast and cleanly.
    • Sharp and doesn’t slip in the chuck.
    • Shank holds up well.

    Cons

    • The diameter markings is strenuous to the eyes.
    • A bit pricey.

     

    5. IRWIN Drill Bit Set Cobalt 15-Pieces (316015) – Best for Safe Drilling

    Durability is no doubt a valuable feature in any product and IRWIN cobalt drill bit set is the perfect illustration of this feature. It is made with high quality cobalt steel material which gives it its superb strength and durability.

    The cobalt steel in these drill bits enables it to cut for long period of time without loss of strength. Another advantage of the cobalt steel is that it can be sharpened, hereby, increasing longevity and workability of the bits. They can drill holes effectively on tough metals like heavy duty abrasive, alloy metal, hardened steel, stainless steel and cast iron.

    IRWIN cobalt drill bit set have 135 degrees split point that minimizes walking and slipping. This in-turn allows for accurate and less stressful drilling. With 8 percent cobalt composition, it can work under high temperature for a long period of time. The cobalt composition also makes it highly abrasion and wear resistant. The shank is also very effective and does not slip into the chuck during high speed drilling operations.

    The 15 drill bits of different sizes are safely secured in a tough storage case. The case makes use of the sliding latch design to ensure that the bits are very secured and well arranged. It is recommended you use a lubricant with this drill bit set in order to get the best results.

    Pros

    • Storage case is well designed and extremely safe.
    • Very sharp and cuts neatly.
    • Really sturdy and durable.
    • Easy to use.

    Cons

      • It gets dull quickly if it is not used with lubricant.
      • A little bit expensive.

     

     

    6. Chicago Latrobe 550 Series Cobalt Steel Jobber Length Drill Bit Set – Best for Low-income Earners

    This is another very strong and reliable drill bit set. This high speed drill bit set is made with heavy-duty cobalt steel which makes it very hard and durable.

    Chicago cobalt steel drill bit is notably harder and durable than other normal high speed drill bits. It is coated with gold oxide which provides lubrication  during drilling operations and makes it wear-resistant. It also has extra thick web that provides increased strength and rigidity compared to other regular drill bits.

    It incorporates a 135 degrees split point. This makes it self-centering and eliminates walking and wandering. This feature also allows it to penetrate hard materials with ease without needing a pilot hole. It also produces small chips during drilling to reduce clogging.

    The set contains 21 drill bits that are well arranged and secured in a storage box. The size of this drill bit set ranges from 1/16 inch to 3/8 inch with 1/16 inch increment. Being a jobber length twist drill bit set, they have a wide range of application and can work on numerous materials.

    Pros

    • Very sharp and durable.
    • Pocket friendly and really reliable.
    • Sturdy and effective.
    • Easy to use and sharpen.

    Cons

    • The shank does not fit well.
    • Needs to be sharpened often

    FAQ on Hardened Steel Drill Bits

    Q. How do I go about sharpening my drill bits?

    A. Sharpening of drill bits is a widely accepted way of extending their workability and longevity, provided you sharpen them with the right material.

    You can sharpen your drill bit effectively by using a bench grinder or a diamond file. For additional insight on this you can search online for tutorial videos.

    Q. What type of material is most suitable for hardened steel bits.

    A. The best material for hardened steel drill bit is cobalt. This is due to its strength, durability and effectiveness compared to the other types available.

    Carbide (high-carbon steel) is also a good option as it is also very strong and durable.

    Q. What effect does the length of drill bits have on effectiveness?

    A. The length of a drill bit definitely affects its effectiveness and accuracy.

    For hardened steel and metals generally, a short steel drill bit is the most suitable as it offers more rigidity and accuracy. Using a longer drill bit might lead to the breaking of such a drill bit.

    Conclusion

    With everything that has been discussed, it has been made obvious that what makes the best hardened steel drill bit is largely dependent on various specifications.

    We have also shown that the best drill bits for hardened steel is not dependent on fanciful design. But rather having the right information on what makes a good one.

    Finally, always make sure you get the right drill bit for the job. Using the wrong drill bit on hardened steel can lead to serious injury and destruction of the drill.

    Best Sliding Compound Miter Saw 2020 – Buying Guide & Reviews

    Having the best set of tools to carry out a job and knowing where to find it is what all professionals and enthusiasts crave for. For professional and enthusiast woodworkers, the limitations of a miter saw causes waste of time and restricts your creativity. With the invention of sliding compound miter saw comes the flexibility and versatility you have always wanted.

    For a novice, a miter saw is a woodworking tool that is used to make neat and accurate cuts on a wood. But this tool is very restricted as it can only make miter cuts and can work in only 90 degrees. This brought about the need for a compound miter saw whose only difference from a miter saw is that, it can make bevel cuts i.e to make cuts at an angle above 90 degrees.

    There were still limitations to the compound miter saw, as it can only cut woods within the range of 6 to 8 inches.Cutting thicker materials was difficult to near impossible. This brought about the need for a sliding compound miter saw.

    A sliding compound miter is more or less like a compound miter saw with an additional guiderails which allows the head of the saw to move back and forth. This allows you to make lengthier cuts. So in essence, this saw combines all the attributes of the previous two editions of miter saws with an additional guide rail, which means that it can make a miter, bevel, lengthier and thicker cuts.

    Continue reading

    6 Best Router Bits 2020 – What Stands Out From The Crowd?

    Regardless of whether you’re a seasoned woodworker or just starting as a carpenter, you’ll find a router bit indispensable for your woodwork projects.

    Veteran woodworkers are fully aware of the significance of quality router bits i.e., how the tools can enable them to complete their woodwork jobs. Router bits are must-haves when it comes to designing and creating cabinets and furniture and a variety of other sculptures from wood.

    A router is one of the most versatile tools that a carpenter or woodworker can have in his workshop. After you have chosen a router that best serves your needs, the next thing you need to select is router bits.

    No matter whatever brand of plunge, fixed-based or D-handle router you use, the tool will be useless without router bits.

    Though you will come across different types of router bits in various sizes and shapes, you may need only a few specific kinds for dealing with your woodworking.

    For instance, you’ll need an edge beading bit for trimming and shaping rims of bookshelves, chair arms, and tabletops. So, the task of choosing appropriate router bits can become challenging and hectic if you don’t know what you’re looking for.

    Continue reading
    1 2 3 6