How To Notch Wood – Top Memorable Tips You Should Know

Notch wood is the most basic technique for any carpenter. In order to repair or make normal wooden items, even if you are not a carpenter, you still need to know how to notch wood. This article will show you recommended methods to cut wood and tips to make beautiful notch.


#1 Best Way to Notch Wood

Before understanding how to notch wood, you need to pick up suitable method. There are four common methods to notch wood using different tools:

- Hammer and Chisel

This is the most basic and manual technique when notch the wood. A razor-sharp chisel fits many types of notch, including: mortise cut, paring cut, chopping cut, chop and pare; and scraping. Despite using other modern technique with machines, you still need to use hammer and chisel for cleaning and defining the notch after cutting.

- Router

As for half-inch notch, router is ideal option for you. It’s less time-consuming than other techniques in which you only plunge down the router blade into the wood in the desired depth and removes the materials inside. However, you need to control the even speed when using the router, not too fast to make rough cut, and not too slow to create burn marks.

- Circular Saw

Circular saw allows you to notch the wood with different depth, width and length with less time-consuming.

- Power Drill

Power drill is perfect for too shallow cut and also if you want to notch not in straight lines. However, this method requires you to control your stability and speed during the process or else, the cut will be askew and uneven.

#2 How to Notch Wood by Circular Saw

Today we will show you easy way to notch wood by using a circular saw. This method is less time-consuming and flexible to make beautiful cutting wood.

Below are indispensable tools for notch wood:

  • To measure the notch: tri-square, ruler, pencil
  • To notch wood: circular saw, cutter knife
  • To define the notch: hammer, chisel
  • Protective gear: eyeglasses, dust mask

Step 1: Measure the notch

Using a tri-square to locate and sketch the location and the shape of the notch in the wood. Measure the actual size of the notch (length, width and depth) by a ruler and mark by a pencil in all sides of the wood to make sure your cutting lines are accurate.

Measuring The Wood Before Cutting – Photo Credit:

Step 2: Notch wood

Before going into the main part, you need to wear all protective gears for safety.

Place your wood on the table saw.

Using a cutter knife to cut the lines based on your sketch in step 1 to make sure your cutting process using a circular saw latter on will be accurate.

Turn on the circular saw. Hold the wood flush to the miter gauge by one hang and using the other hand cut the notch by the desired depth. Remember to move the blade evenly, parallel to the grains and slow down when you are almost reaching the depth needed. Turn off the circular saw completely before move it to another location.

Notch Wood With Even Force – Photo Credit:

Step 3: Define the notch

After finish cutting the notch, you need to remove all the material within the cutting lines. Use a hammer and a chisel to define the notch manually. Just after three steps, you can have a beautiful notch of the wood.

Using A Chisel To Define The Notch – Photo Credit:

#3 Some Memorable Tips to Notch the Wood:

Circular saw is one of the essential tools for any carpenter. When it comes to cutting wood, circular saw really works to its full potential. Besides, it is also commonly used for cutting metal or stone even.

There are few notes you need to strictly follow when using a circular saw to notch the wood:

- Always wear eye protection

Protecting eyes is a matter for everyone, especially carpenters, who are exposed to sawdust and wood dust. Goggles will help protect your eyes from being hurt by strange objects.

Therefore, when starting to cut the wood, you need to wear safety goggles and make sure that the saw blade depth is appropriate or adjust if needed. The saw blade should be placed about a half or one and a half deep under the cutting wood.

Remember To Wear Protectors While Doing Handy Work – Photo Credit:

- Mark and use moderate force when cutting

Use a pencil and a ruler to mark the cutting lines and place the saw blade exactly where you want cut and place the saw blade exactly on the cutting lines.

Wear protective glasses and grip the handle, press the power button and start the engine at the RPM level to start cutting. Apply a moderate pressure to the saw blade during cutting.

- Catch the wood after cutting

You should use a cutting table to support the wood and also make you rest assure about the stability during cutting process. Also, when the wood is completely gone from the table saw without any support, you need to catch the wood when it’s falling while pause the circular saw.

- Turn off the power when you stop using the circular saw

It’s essential to turn off the power and unplug the power cord before inspecting, changing, cleaning, adjusting or repairing blade or the saw. Also do not forget to turn off the power completely after finish to avoid the unintended risk.

How To Notch Wood 4x4


Technique of how to notch wood is essential for not only carpenters but anyone who are willing to fix household furniture by themselves. Depend of different types of wood, your quality requirements and your skill, you can choose different cutting method. No matter what technique, you should put safety first by following all safety rules and technical tips to ensure the best wooden products.

Click Here to Leave a Comment Below 0 comments

Leave a Reply: